MonaLisa Touch^® requires the HiScan V²LR scanner system to deliver fractionated laser energy to the vaginal mucosa. The scanner comes with two autoclavable probes to perform two different procedures: a 360° probe for MonaLisa Touch treatments and a Vulvar probe for vulvar treatments.

HiScan V²LR scanner system may also integrate two optional 90° probes (16 mm and 23 mm) for incontinence treatments. Both of them are autoclavable.

HiScan V²LR scanner system may also integrate a single use 360° probe for MonaLisa Touch^® procedures.

DEKA has introduced the new single-use RF Touch handpiece, with a bipolar (and therefore intrinsically safer) radio-frequency source, for vaginal tightening;  providing a unique market possibility to offer a synergistic treatment for the intimate health of patients.

CO₂ surgical handpieces are available for all the models of Smartxide² and the Smartxide²’s basic price includes one handpiece amongst the ones shown in this chapter. All the SmartXide² handpieces are composed by three different parts:
• an external central part (Handpiece Body), 
• an internal part (Focal Assembly) and 
• a distal part (Spacer) which depends by the choosed Focal Group.

The 2” handpiece for dentistry is generally use in soft tissue surgery. Tipical treatments are: Excision, Flap surgery, Gingivoplasty, Implants Uncovering, Removal of Superficial Caries and many other application.
The handpiece includes 2 tips: an Open Tip to fire the laser in line with handpiece's axis, and a tip with mirror to deflect the laser of 120°.

The 4” handpiece for dentistry is mainly use in soft for treatments of pokests and necks like: Sulcus sterilization, Root canal sterilization, Peri-Implantitis, Gingivectomy, Crown lengthening and many other application.
The hanpiece comes with different tips in order to give the doctor the maximum flexibility of use. There are a Straight Tip (with spacer) and an Open Tip (without spacer) to fire the laser in line with handpiece's axis. Than there are tips with mirror to deflect the laser of 75° or 120°. Finally there are Ceramic Tips which use a ceramic light guide to work in contact with the tissue.

At any time SmartXide² can be upgraded including a Diode laser source.

• A 50W 980 nm Diode Laser, which can be installed only in SmartXide2 60W and 80W models; 
• A 50W 940 nm Diode Laser, only for SmartXide² 60W and 80W models ; 
• A 30W 980 nm Diode Laser, for all the models of SmartXide² ; 
• A 30W 940 nm Diode Laser, all the models of SmartXide². 

The most light and thin handpiece for Dentistry. It has been designed for being less bulky and for mounting disposable and non disposable tips for the different application in laser-assisted dentistry.

The Cooled handpiece is the only one that is able to deliver cool air or water at the top of the tip. This handpiece can be used with special cooled tips or if the doctor does not want to use cooling, can mount disposable or non-disposable tips.

A set of 16 reusable tips:

- 4 tips for cooled handpiece and 600 µm fibre
- 4 tips for cooled handpieces and 300 µm or 200 µm fibres
- 4 tips for non-cooled handpiece and 600 µm fibre
- 4 tips for non-cooled handpieces and 300 µm or 200 µm fibres

In each group, the 4 tips differ for the fibre exit angle which could be: straigh, 30°, 60° and 90°. Tips have to be linked to the distal part of the handpiece and are used to deliver the fibre end close to the tissue. This is important especially in order to reach all areas in the mouth or even the internal area of a tooth (in case of endodontic treatments).

DEKA provides 300 µm single use fibres for Dentistry. They are suggested for endodontics, parodontology, surgery and perimplantite treatments.

All fibres are made in silica and have 2 plastic protective tubes: a Teflon tube that starts from the laser connector and covers the fibre for the first 1,5 m; and a silicon tube which protect the remaining part of the fibre. The Teflon tube is stronger and is used to prevent shocks while silicon is more flexible and enhances the freedom of movement.
Fibres come in a double sterile envelope, ready to be used.

DEKA provides reusable fibres for Dentistry which can be sterilized in autoclave up to 10 times. Reusable fibres are 300 µm of diameter and they are suggested for endodontics, parodontology, surgery and perimplantite treatments;

All fibres are made in silica and have 2 plastic protective tubes: a Teflon tube that starts from the laser connector and covers the fibre for the first 1,5 m; and a silicon tube which protects the remaining part of the fibre. The Teflon tube is stronger and is used to prevent shocks while silicon is more flexible and enhances the freedom of movement.

Reusable fibres also have sterilization counters close to the connector. There are ten rings with numbers from 1 to 10. Each ring has to be removed before sterilization. Fibres come in a double sterile envelope, ready to be used.

A sterilization process or a prolonged use, tends to turn opaque fibres silica, especially in free end surface. Opacity can be seen by the reduction of the aiming beam brightness. The main effect of opacity is the reduction of fibre efficiency in delivering laser beam power. In order to regenerate fibre efficiency, DEKA provides a special knife to cut fibre end and create a new transparent fibre end surface. Another useful tool is the fibre cleaver that is able to cut the silicon protective tube avoiding any damage to the fibre lateral surface.

For Endovascular treatment with Diode laser (EVLT – EndoVascular Laser Treatment) DEKA is proposing a disposable fibre kit. The underlying goal for this thermally mediated ablation procedure is to deliver sufficient laser energy to the wall of an incompetent vein segment to produce irreversible occlusion, fibrosis, and ultimately disappearance of the vein. The procedure can be accomplished in Day Hospital and it is well established since several years. DEKA is able also to supply complete information about this procedure and complete instructions how to use this fibre kit.